-
As you can notice, the site has been set as GM engineering
to provide for a better service.
Munufacturing companies will be chosen according
to different jobs.
These pages are about the very
many plastic recycling machinery available on the market for the
recycling of plastics.
You can use these pages to gather information
about methods for granulation, separation, washing, rinsing,
drying and pelletizing of different plastics available in form
of scrap.
Of course we will point out what we think
is the best in this field, covering most of the aspects of machinery
for plastic
recycling.
After browsing all pages, when you think
you know everything, think it over again; the reason is the
fact that if you miss a small point in the construction of the
plant, whatever you built is just useless.
The concept of any line composed by
a set of different machines is the fact that
if one small device doesn't work, nothing works so, be careful
and go deeply into each subject.
It took 30 years to us to understand what's
going on running a plastic recycling system and we hope you're
more clever than us and it will take less time for you to
get to it.
Plastic recycling is not an easy business
so be very careful when choosing a system: not all the time
the cheaper the better.
Thanks for being here.
|
 |
| Information about plastic
recycling machinery |
Post-consumer
scraps recycling
Post-consumer
scraps are available
in huge quantities at
a low price, sometimes
for free. (at least
it use to be this way)
Here
in details all the possibilities
to get a product with good characteristics,
ready to be sold in the market.
Post
industrial scraps
recycling
Some information about clean, already sorted. post-industrial scraps
and common methods
to put them back
into the production
process.
A short description
of (almost) all machinery available
on the market for the
recycling of plastics,
divided by category.
An extensive description
of the different steps
to achieve a good quality
product with some considerations
about the economics
involved.
Post-consumer
scraps need
a certain number
of machinery
one after the
other, to get
a good final
product.
This
means if one of the components is not
the right one, the entire set up is
in trouble and operating costs will
be high.
After you
get them all,
you need a way
to interlock
everything as
far as electric,
water,
mechanical and
pneumatic.
A good initial
set
up makes you
to save a lot
of money as
far as operating
costs.
Some technical information about
the complete plastic recycling system
and all machinery of the set up.
|
|
Specially if you're starting
from scratch, it may be useful to
you to understand what is important
and what's not.
We will drive you from step
one all the way to get a factory
up and running and make you know since
the very beginning the investment
and operating costs of a plastic
recycling business.
The very last machine of most of
recycling lines is the extruder.
Extruders for plastic scraps should
have some specific characteristics..............
Because all scraps
are different and you may have a specific
problem, we can make a study and run
some trials for you to see if it is
feasible, or not.
May be we did already face your problem
and figure out the solution.
Sometimes a picture
tells you more than a full description.
Here some of
them
If you're already
in recycling, a complete layout is what
you need to understand our technology.
Here some of
them
Some sites to
understand more about plastic recycling.
If you like to
link to us, please drop us a line and
we'll get back to you as soon as we
can.
Just added some links for garbage separation systems and complete solutions heading to "zero waste" to landfills
Our mail address:
giorgio.mattiello@gmail.com
|
- ---------------------------------------------------------------------------------------
- We
are going to publish some documents
about plastic recycling once in a while so,
when you have some spare time, come
back to the site.
-
-
- What
about a second hand machine ? Click
here
|
|
